Let’s see your dirt bike

GENERAL CHITCHAT
21

It’s also possible to make a comfortable ADV-lite with a little bike. Here’s Starla’s CRF300LS (the S designation is maybe for Short? It’s lowered from the factory, and otherwise identical to the CRF300L.)

L1020359
L10203591639×2048 335 KB

L1020365
L10203651639×2048 285 KB

L1020364
L10203641920×1536 367 KB

1 Like
22

I have seen the Wife of DonkeyHut’s bike in person. It’s sweet! Very well set up!

1 Like
23

2023 Beta 300RR/RE

Love this thing

PXL_20250808_225039499
PXL_20250808_2250394991920×2550 1.16 MB

3 Likes
24

Snagged a used 2021 Sherco 300 2T from Elite when they were still in Loveland. First summer with it was a blast, this thing has way more capabilities than my skills can take advantage of. Pic of where I gave up my solo attempt going up Killpecker in Red Feather.

PXL_20250817_150916097
PXL_20250817_1509160971920×1440 507 KB

1 Like
25

haha. I suppose AssShack would imply too many other meanings.

26

That B-52’s song will never be the same for me. Thx

27

Just picked up this project today. It ran rough on the bad gas in it with a push start and needs fork seals at least but otherwise looks clean enough for the price. Looks like I’ll be busy the next few weeks finishing up work on the GSA and starting on this.

IMG_0018
IMG_00181920×2560 648 KB

8 Likes
28

I have a 2001. My favorite bike

1 Like
29

IMG_20250910_093354
IMG_20250910_0933543024×4032 6.07 MB

2023 TM Racing EN300 ES

3 Likes
30

IMG_0900
IMG_09001920×1440 448 KB

2019 Gas Gas EC300

1 Like
31

@MotoJason Nice Beta in the background, there…:slightly_smiling_face:

32

@Ddejong I have a 96. I’ve got a new cam with the autocomp delete that has to get installed, and need new valve seals. Looking forward to a ride with two 400Rs taking part.

1 Like
33

I just started work on her this weekend, hopefully a few weeks…

34

IMG_2923
IMG_29231920×1440 833 KB

4 Likes
35

I picked up a 2025 Beta 390 x-pro in Kansas yesterday at a pretty good price.

PXL_20251215_223346579
PXL_20251215_2233465791920×2560 1.19 MB

5 Likes
36

I have Lunar balls sitting in the garage I think I’ll install tonight.

2 Likes
37

Let us know how that goes - I think I want to put some in my 500’s tires

1 Like
38

I was running Nitro Mousses on my 2T, but will welcome the not having to use lube. I might add a valve stem to be able to inject grease after I check em in a couple hundres miles. Morgan from Highland Cycles is doing some testing and they have been holding up well. I bought soft for the rear, which may have been shortsighted as I intend to do some road sections on this bike and treat as a minimal DS bike. We’ll see how squirmy it feels :slight_smile:

1 Like
39

Def curious as well as I want to put the Lunar 2.0 on the DS bike. Thanks for any updates

1 Like
40

I’ve always run the “plush” mousse in the rear. I’ve done 75+ mile pavement stretches. Just keep it around 55-65mph or so and keep the mousse lubed well

2 Likes